DRM Library installation¶
This section explains how to install the Accelize DRM library API from packages and from source.
Supported OS¶
Accelize supports the following “long time support” OS and provides fully tested packages for them:
RHEL/Centos 7 1
Debian 9 Stretch
Debian 10 Buster
Ubuntu 16.04 LTS Xenial
Ubuntu 18.04 LTS Bionic
Following OS have been tested but are not supported by Accelize:
Debian Testing 2
Fedora (2 latest stable versions)
Ubuntu (2 latest stable versions)
Software requirements¶
The Accelize DRM C/C++ library requires a compiler with full C++11 support.
The Accelize DRM Python library requires Python >= 3.5.
Installation from packages¶
The DRM library packages are available only for the amd64 / x86_64 architecture.
Install Accelize repository¶
Packages are hosted on the Accelize repository.
Note
Packages and repositories metadata are signed for security.
Accelize provides stable and a prerelease channels.
To install the prerelease channel simply replace stable by prerelease in the rest of this document.
Warning
No support is provided for prerelease packages.
Debian, Ubuntu: DEB repository¶
To install the repository, run the following commands:
# Ensure common system utilities are installed
sudo apt update
sudo apt install -y apt-transport-https software-properties-common lsb-release gnupg curl
# Add Accelize GPG public key for package signature verification
curl -fsSL https://accelize.s3.amazonaws.com/gpg | sudo apt-key add -
# Install repository
sudo add-apt-repository "deb https://accelize.s3.amazonaws.com/deb $(lsb_release -cs) stable"
sudo apt update
RHEL, CentOS, Fedora: RPM repository¶
To install the Accelize repository, run the following commands:
# Ensure that config manager is installed
sudo yum install -y yum-utils
# Install Accelize repository:
sudo yum-config-manager --add-repo https://accelize.s3.amazonaws.com/rpm/accelize_stable.repo
# Ensure config manager is installed
sudo dnf install -y 'dnf-command(config-manager)'
# Install repository
sudo dnf config-manager --add-repo https://accelize.s3.amazonaws.com/rpm/accelize_stable.repo
Python Library and systemd service package¶
This section explains how to install the DRM library as a python module or systemd service. It is available for Python 3 only.
This package provides 3 levels of integration:
The Accelize DRM library Python
Cython headers to the C/C++ Accelize DRM library.
A systemd service that provides a generic Accelize DRM implementation as a background service (the service is not started by default). Refer to Accelize DRM Service for more details, especially to see the supported environments.
Depending on your OS, use the following command to install the Python package:
sudo apt install -y python3-accelize-drm
# Ensure EPEL repository is installed (Allow to setup Python 3.6 dependency)
sudo yum install -y epel-release
# Install package
sudo yum install -y python36-accelize-drm
sudo dnf install -y python3-accelize-drm
Note
The python DRM library is a wrapper of the C/C++ DRM library. The package will install automatically the C/C++ library.
Installation has been completed. To verify your installation, refer to the section ‘Validate your integration’ in Getting started.
C/C++ Library package¶
This section explains how to install the DRM library as a C/C++ library API.
Run the following command:
sudo apt install -y libaccelize-drm
sudo yum install -y libaccelize-drm
sudo dnf install -y libaccelize-drm
C/C++ Library Development package¶
This section explains how to install the DRM library as a C/C++ library API. It provides the C/C++ header files and the documentation.
Run the following command:
sudo apt install -y libaccelize-drm-dev
sudo yum install -y libaccelize-drm-devel
sudo dnf install -y libaccelize-drm-devel
Note
The development package also install an offline version of this
documentation that can be found read by opening
/usr/share/accelize/drm/doc/html/index.html.
Installation from source¶
The installation from source is only recommended if there is no package available for your configuration or to contribute to the DRM library.
This is equivalent to install the C/C++ library package, the C/C++ library development package and optionally the Python library package.
If you need the full detail of building and testing options, refer to DRM library build & test.
Minimal requirements:
git
cmake >= 3.12
make (Or any CMake supported build tool)
GCC, G++ >= 4.8 (Or any compatible C++11 compiler)
libcurl-devel
jsoncpp-devel
Python library requirements:
Python >= 3.5
Python-devel
setuptools
wheel
cython >= 0.28
Run following commands to install all requirements:
# Minimal requirements
sudo apt update
sudo apt install -y git make g++ libcurl4-openssl-dev libjsoncpp-dev cmake
# Python library requirements
sudo apt install -y python3-dev python3-wheel python3-setuptools cython3
# Minimal requirements
sudo apt update
sudo apt install -y git make g++ libcurl4-openssl-dev libjsoncpp-dev python3-pip
pip3 install --user -U cmake
# Python library requirements
sudo apt install -y python3-dev
pip3 install --user -U cmake setuptools wheel cython
# Minimal requirements
sudo yum install -y epel-release
sudo yum install -y git make gcc gcc-c++ libcurl-devel jsoncpp-devel python36-pip
pip3 install --user -U cmake
# Python library requirements
sudo yum install -y python36-devel
pip3 install --user -U setuptools wheel cython
# Minimal requirements
sudo dnf install -y git make gcc gcc-c++ libcurl-devel jsoncpp-devel cmake
# Python library requirements
sudo dnf install -y python3-devel python3-setuptools python3-Cython python3-wheel
Then run the following commands to build and install the library:
git clone https://github.com/Accelize/drmlib.git --recursive --depth 1
mkdir -p drmlib/build
cd drmlib/build
# The "-DPYTHON3=ON" option is required only to build the Python library
cmake -DPYTHON3=ON ..
make -j
sudo make install
Build packages¶
If you need to build packages to easily deploy the library on your production environment, you need to install additional requirements:
For DEB Packages:
pkg-config
dpkg-dev
file
For RPM packages:
rpm-build
Run following commands to install requirements:
sudo apt install -y pkg-config dpkg-dev file
sudo yum install -y rpm-build
sudo dnf install -y rpm-build
Once dependencies are installed, simply run the previous section build and install commands but replace “sudo make install” by:
make package
Packages will be generated in the drmlib/build/packages directory.